噴淋清洗機主要利用設備現場的剪切力和氣泡的空化腐蝕進行清洗，為了更好的使用它進行清洗物件，下面我們從講講它的功能特點。

The spray washer mainly uses the shear force at the equipment site and cavitation corrosion of bubbles for cleaning. In order to better use it to clean objects, let's talk about its functional characteristics.

1、高壓噴淋清洗機的內腔主要由不銹鋼制成、耐酸堿，使用壽命長。

1. The inner chamber of the high-pressure spray washer is mainly made of stainless steel, acid and alkali resistant, and has a long service life.

2、該設備將有效地配備加熱和溫度自動控制系統，使用其不銹鋼加熱管即可直接加熱。

2. The equipment will be effectively equipped with heating and temperature automatic control system, which can be directly heated by using its stainless steel heating tube.

3、采用輥道輸送機，工件運轉平穩，驅動輥均為不銹鋼。

3. The roller conveyor is adopted, the workpiece operates stably, and the driving rollers are all stainless steel.

4、建立液位安全控制系統，確保機器正常運行。

4. Establish a liquid level safety control system to ensure the normal operation of the machine.

5、提供循環過濾系統以確保溶液的清潔度。

5. A circulating filtration system is provided to ensure the cleanliness of the solution.

6、往復移動噴涂可在所有方向清洗工件。

6. Reciprocating mobile spraying can clean the workpiece in all directions.

7、高壓噴淋清洗設備有效地利用了扇形陶瓷噴嘴，調節了噴嘴角度，保證了噴嘴的使用壽命。

7. The high-pressure spray cleaning equipment effectively uses the fan-shaped ceramic nozzle, adjusts the nozzle angle, and ensures the service life of the nozzle.

8、入口采用橡膠輥和惰輪、進給速度穩定，速度與輥道同步、滾輪與惰輪之間的距離可根據工件的尺寸進行調整。

8. The rubber roller and idler gear are used at the inlet, the feed speed is stable, the speed is synchronized with the roller table, and the distance between the roller and the idler gear can be adjusted according to the size of the workpiece.

9、高壓噴頭清洗設備頂部裝有吸淋裝置，以保證清潔的工作環境。

9. The top of the high-pressure nozzle cleaning equipment is equipped with a drenching device to ensure a clean working environment.

噴淋清洗機的主要工作是將適量的水有效地投入到箱體的前部，在運行過程中通過加熱管加熱水，原料將通過箱體，當操作時，它將直接完成軋制狀態。您有什么不了解的地方就來我們網站m.0359hd.com進行咨詢了解吧！

The main work of the spray washer is to put an appropriate amount of water into the front of the box effectively. During operation, the water is heated through the heating pipe, and the raw materials will pass through the box. When operating, it will directly complete the rolling state. If you don't know anything, please come to our website m.0359hd.com for consultation!